top of page
EN
ES
Our Products

OUR PRODUCTS

Springfield products are manufactured with the highest technology and equipment, fully tested and calibrated before shipment. Our specific knowledge and experience will assure conformance to process control standards and requirements. With HART, FM and ATEX conformance, we deliver our technology assuring the best quality and keeping your project schedule on time.

Anchor 1
Product Line 914

Product Line 914

914A Pressure Transmitter Absolute
914A Pressure Transmitter Absolute

The 914A is an industrial-grade absolute pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.

  • Absolute pressure capacitive transmitter.

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Pressure port for thread 1/4 “NPT or 1/2” NPT adapter.

914D Pressure Transmitter Differential
914D Pressure Transmitter Differential

The 914D is an industrial-grade differential pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.

  • Capacitance based differential pressure transmitter.

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Pressure port for thread 1/4 “NPT or 1/2” NPT adapter.

  • Pressure measurement from 20mbar to 200bar;

914G Pressure Transmitter Gauge
914G Pressure Transmitter Gauge

The 914G is an industrial-grade gauge pressure instrument ideal for use in process control. The mechanical sensor is based off pressure transmitter for stain gage resistance, built off a ceramic diaphragm that provides accuracy. The output provides a 4/20mA signal with HART communication.   Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.  Differential Pressure transmitters have a limitless number of industrial applications.

  • HART technology 4/20mA ideal for acquisition of data and process control.

  • Pressure measurement from 4bar to 350bar.

  • Overpressure and static pressure suitable for industrial installations.

  • Compatible with many liquids, steam and gases.

  • Suitable for pressure measurement and level.

  • Compatible with tubes and pipe connections, option for flanges and remote seal.

914L Pressure/Level Transmitter
914L Pressure/Level Transmitter

The 914L is an industrial-grade pressure instrument ideal for use in process control. The mechanical sensor is based off pressure transmitter for stain rage resistance, built off a ceramic diaphragm that provides accuracy and thickness. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure transmitters have a limitless number of industrial applications. 

  • Capacitive level transmitter for liquids.

  • Low maintenance, easy calibration and configuration.

  • Easy installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Easy installation for DIN or ASME flanges.

914M Pressure Transmitter Gauge
914M Pressure Transmitter Gauge

The 914M is an industrial-grade gauge pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.

  • Capacitive gauge pressure transmitter.

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Pressure port for thread 1/4 “NPT or 1/2” NPT adapter.

914R GWR Radar Level Transmitter
914R GWR Radar Level Transmitter

The 914R is an intelligent HART level transmitter designed to detect liquid or solid levels in vessels. The 30 301 sends and receives radio frequency pulses through the probe using guided wave radar (GWR) techniques for the purpose of level detection. These pulses travel down the probe until the product surface is reached and are then reflected and received back at the device. Using Time Domain Reflectometry (TDR) principles, the 914R is able to effectively calculate the level of the measured product from these received pulses. The 914R level information can be output as a user configurable 4-20mA signal or monitored remotely via the HART protocol.

  • Guided wave radar level transmitter.

  • Low maintenance, auto calibrated references.

  • Easy installation, directly in tanks or auxiliary vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Easy installation, 1 1/2 “NPT thread enables numerous options.

914S Pressure Transmitter Sanitary
914S Pressure Transmitter Sanitary

The 914S is an industrial-grade differential pressure/level instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure/level transmitters have a limitless number of industrial applications. 

  • Capacitive Sanitary Pressure Transmitter

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Facility in installation, model TRICLAMP, RTJ, IDF, SMS, DIN11851.

914T Temperature Transmitter
914T Temperature Transmitter

The 914T is an industrial-grade differential pressure/level instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure/level transmitters have a limitless number of industrial applications. 

  • Temperature transmitter, mV, Ohm.

  • Low maintenance, easy calibration and configuration.

  • High precision input with minimum galvanic isolation of 500Vdc.

  • HART technology provides ease of setup and diagnostics during operation.

  • Compatible with Thermocouple or RTD sensors, and mV or Ohm type transducers

  • Support for differential thermal measurement or 2 measurement points.

914DNS Pressure/Density Transmitter
914DNS Pressure/Density Transmitter

The 914DNS is an industrial-grade differential pressure/level instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure/level transmitters have a limitless number of industrial applications. 

  • Low maintenance, easy calibration and configuration.

  • HART technology provides ease of setup and diagnostics during operation.

914SRT Pressure Transmitter with Remote Seals
914SRT Pressure Transmitter with Remote Seals
  • Pressure transmitter with remote seals.

  • Low maintenance, easy calibration and configuration.

  • Easy installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Easy installation for DIN or ASME flanges with or without extension  flange->diaphragm.

  • Available in diameters from 1” to 4” (DN25 to DN100) pressure rating from 150 to 600 psi (PN10 to PN40)

914A PRESSRE TRANSMITTER ABSOLUTE
914D PRESSURE TRANSMITTER DIFFERENTIAL
914G PRESSURE TRANSMITTER GAUGE
914L PRESSURE/LEVEL TRANMITTER
914S PRESSURE TRANSMITER SANITARY
914T TEMPERATURE TRANSMITTER
914DNS PRESSURE/DENSITY TRANSMITTER
Springfield Research
bottom of page